Thanks, Jeff, but that only works for the 2.4 kernel.
Don
On 1/26/2011 10:55 AM, Jeff O'Brien wrote:
>
> Hi Don,
> I believe you have to insmod tsuart0.o and tsuart7260.o
>
> And then it will appear at /dev/ttyTS0
>
> Jeff
>
> > Hi, Jim. I was unclear. I want to be able to access COM3 (ttyS2) on the
> > main board, but it is not recognized by utilities like wvdialconf or
> > setserial. Is there a 2.6 driver that can be loaded on the main board so
> > that COM3 is recognized? If ttyAM2 is COM3, is there a way to map ttyS2
> > to that port so that other utilities will recognize it?
> >
> > Thanks,
> > Don
> >
> > On 1/26/2011 6:54 AM, Jim Jackson wrote:
> >>
> >>
> >>
> >> On Tue, 25 Jan 2011, Rekcut_Nod wrote:
> >>
> >>> Is there a serial driver for the TS7260 for the 2.6.xx kernel? I tried
> >>> modprobing ts72xx_isa16550.ko but it only sets the UART for ttyS0. I
> >>> want to be able to use COM3 (ttyS2) with a peripheral board.
> >>
> >> The on board serials are ttyAM0,1 and 2 (2 on a linux 2.4 if you
> load the
> >> TS module for the 3rd serial).
> >>
> >> So ttyS0 for the first serial on your add on board seems logical.
> >>
> >>
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|