The getting started page for the TS-ETH2
http://www.embeddedarm.com/about/resource.php?item=365
explains how to load modules for the 2.4 kernel, but not for the 2.6 kernel.
I tried to follow the analogous procedure:
modprobe libcrc32c
cp ax887696b.ko ts-dual-eth1.ko
insmod ts-dual-eth1.ko mem=0x100 irq=22
But, this returns an error:
AX88796B: not found (no reset ack)
insmod: error inserting 'ts-dual-eth1.ko': -1 No such device or address
Is there a procedure for using the TS-ETH2 with a 2.6 kernel?
Thanks,
Don
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|