For the record, I was able to figure out how to load the drivers with Brett's
help at Technologic Systems:
modprobe -o tseth2-1 ax88796b mem=0x200 irq=22
modprobe -o tseth2-2 ax88796b mem=0x240 irq=33
Now the interfaces from the TS-ETH2 show up when I type "ifconfig -a", but when
I actually try to bring the interfaces up I get an error:
ts7000:/root/ifconfig eth1 up
eth1: Unable to get IRQ 22 (errno=-22).
SIOCSIFFLAGS: No such device or address.
Has anyone had any luck using the TS-ETH2 with a 2.6 kernel?
Don
--- In Don Tucker <> wrote:
>
> Kris, I tried adding the iobase parameter to the insmod command, but the
> result was the same.
>
> insmod ts-dual-eth1.ko iobase=0x11e00000 mem=0x200 irq=22
> AX88796B: not found (no reset ack)
> insmod: error inserting 'ts-dual-eth1.ko': -1 No such device or address
>
> Is that the correct syntax?
>
> Don
> On 1/26/2011 2:05 PM, Kris wrote:
> >
> > You also need to specify the iobase parameter, this is the base of the
> > PC/104 address region.
> >
> > -Kris Bahnsen
> > Technologic Systems
> >
> > --- In <ts-7000%40yahoogroups.com>, Don
> > Tucker <dtucker@> wrote:
> > >
> > > The getting started page for the TS-ETH2
> > > http://www.embeddedarm.com/about/resource.php?item=365
> > > explains how to load modules for the 2.4 kernel, but not for the 2.6
> > kernel.
> > >
> > > I tried to follow the analogous procedure:
> > >
> > > modprobe libcrc32c
> > > cp ax887696b.ko ts-dual-eth1.ko
> > > insmod ts-dual-eth1.ko mem=0x100 irq=22
> > >
> > > But, this returns an error:
> > >
> > > AX88796B: not found (no reset ack)
> > > insmod: error inserting 'ts-dual-eth1.ko': -1 No such device or address
> > >
> > >
> > > Is there a procedure for using the TS-ETH2 with a 2.6 kernel?
> > >
> > > Thanks,
> > > Don
> > >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|