Hi, Jim. I was unclear. I want to be able to access COM3 (ttyS2) on the
main board, but it is not recognized by utilities like wvdialconf or
setserial. Is there a 2.6 driver that can be loaded on the main board so
that COM3 is recognized? If ttyAM2 is COM3, is there a way to map ttyS2
to that port so that other utilities will recognize it?
Thanks,
Don
On 1/26/2011 6:54 AM, Jim Jackson wrote:
>
>
>
> On Tue, 25 Jan 2011, Rekcut_Nod wrote:
>
> > Is there a serial driver for the TS7260 for the 2.6.xx kernel? I tried
> > modprobing ts72xx_isa16550.ko but it only sets the UART for ttyS0. I
> > want to be able to use COM3 (ttyS2) with a peripheral board.
>
> The on board serials are ttyAM0,1 and 2 (2 on a linux 2.4 if you load the
> TS module for the 3rd serial).
>
> So ttyS0 for the first serial on your add on board seems logical.
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|