Thanks, Kris. I used that source, but when I modprobed it, it doesn't
seem to assign a UART to /dev/ttyS0->ttyS2.
ts7000:/dev# modprobe tsuart7260
ttts0 at MMIO 0x12400000 (irq = 32) is a TSUART
ts7000:/dev# setserial -g /dev/ttyS*
/dev/ttyS0, UART: unknown, Port: 0x0000, IRQ: 0
/dev/ttyS1, UART: unknown, Port: 0x0000, IRQ: 0
/dev/ttyS2, UART: unknown, Port: 0x0000, IRQ: 0
/dev/ttyS3, UART: unknown, Port: 0x0000, IRQ: 0
ts7000:/dev# setserial -g /dev/ttts0
/dev/ttts0, UART: undefined, Port: 0x0000, IRQ: 32
Has anyone figured out how to use this?
Don
> This is something we have done in the past, but not yet released in a
> tarball. I have posted the updated tsuart7260.c file to pastebin:
> http://pastebin.com/6EEhEM2e You can use the standard tsuart1.ko and just
> load this on top of it. Note that we do not officially support this and
> it is provided as-is.
>
> -Kris Bahnsen
> Technologic Systems
>
>
> --- In "Rekcut_Nod" <> wrote:
>>
>> Is there a serial driver for the TS7260 for the 2.6.xx kernel? I tried
>> modprobing ts72xx_isa16550.ko but it only sets the UART for ttyS0. I
>> want to be able to use COM3 (ttyS2) with a peripheral board.
>>
>> Don
>>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|