ts-7000
[Top] [All Lists]

Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260

To:
Subject: Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260
From: Dave Cramer <>
Date: Wed, 4 Jun 2008 17:44:01 -0400
Sorry I have to top post. my Mail client has issues with this format

Yes, ttyTS0 works now

The only problem is I can't get it to work with pppd ???

I can talk to the modem directly with picocom

but pppd can't connect

Dave
On 4-Jun-08, at 5:27 PM, Michael Schmidt wrote:

Dave Cramer wrote:
> There are 3 ports on the 7260 and two naming schemes
> 
> ttyAM0-2 are the normal ports

COM1: ttyAM0
COM2: ttyAM1
unused: ttyAM2

> 
> ttyS0-2 are the ports accessed through the tsuart driver.
> 
> ttyS0 is the main port with the db-9 device
> ttyS1 is com2
> ttyS3 is com3

ttyTS, not ttyS...

Assuming you don't have any other TS-UARTs loading (i.e. on a daughter 









card like the TS-RF2...)

COM3: ttyTS0
COM4: ttyTS1
COM5: ttyTS2







COM4/COM5 are only valid (and the corresponding /dev entries present ) if 
you have the OPT-2TTLCOM option; these ports are on the DIO2 header.

______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael

Messages | Files | Photos | Links | Database | Polls | Members
MARKETPLACE

Blockbuster is giving away a FREE trial of - Blockbuster Total Access.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU