On Wed, Jun 4, 2008 at 4:45 PM, Dave Cramer <> wrote:
> On 4-Jun-08, at 3:24 PM, Gonzalo A. de la Vega wrote:
>
> On Wed, Jun 4, 2008 at 4:15 PM, Dave Cramer <>
> wrote:
>>> I'm opening /dev/ttyTS2
>>
>> Did you mean /dev/ttyAM2? Anyway, the port marked as COM3 is /dev/ttyTS0
> There are 3 ports on the 7260 and two naming schemes
>
> ttyAM0-2 are the normal ports
> ttyS0-2 are the ports accessed through the tsuart driver.
> ttyS0 is the main port with the db-9 device
> ttyS1 is com2
> ttyS3 is com3
> As far as I know.
> Dave
Hmmm... mine have XDIO, so I have (device file; marked as):
ttyAM0; COM1 (this is the DB9)
ttyAM1; COM2
ttyAM2; no connector but the device is there anyway
ttyTS0; COM3
(just as the one is the TS7260 picture on TS's site)
I think the naming scheme is confusing if you have XDIO or the extra
TTL ports :-P
Gonzalo
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|