Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260

[Dave Cramer <>]

I'm opening /dev/ttyTS2

Dave

On 4-Jun-08, at 2:08 PM, Michael Schmidt wrote:

Dave Cramer wrote:
> For some reason I can't read or write anything on the 3rd port.
> 
> Port opens, but just doesn't respond to writing or reading. Are there 
> any tricks ?

What device file are you opening? The third UART is a TS-UART and 
should show up on /dev/ttyTS0 (although t h e port number could be 
affected if other TS-UARTs get loaded before the 7260 driver...)

> 
> Technologic is not very helpful either.
> 
> Dave

______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___