| To: | |
|---|---|
| Subject: | Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260 |
| From: | Triffid Hunter <> |
| Date: | Thu, 5 Jun 2008 12:06:25 +1000 (EST) |
On Wed, 4 Jun 2008, Dave Cramer wrote:
> Michael,
>
> What I do see when pppd starts up is
>
> tsuart:change_speed, port 0: 115200 bad
>
> I don't see that with the other two ports.
Perhaps it only goes to 57600?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| Previous by Date: | Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260, Dave Cramer |
|---|---|
| Next by Date: | [ts-7000] Re: Curiosity with PL2303 and getty., charliem_1216 |
| Previous by Thread: | Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260, Dave Cramer |
| Next by Thread: | Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260, Michael Schmidt |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU