Re: [ts-7000] Any tricks to get serial port 3 to work on a 7260

[Michael Schmidt <>]

Dave Cramer wrote:
> For some reason I can't read or write anything on the 3rd port.
> 
> Port opens, but just doesn't respond to writing or reading. Are there  
> any tricks ?

What device file are you opening?  The third UART is a TS-UART and 
should show up on /dev/ttyTS0 (although the port number could be 
affected if other TS-UARTs get loaded before the 7260 driver...)


> 
> Technologic is not very helpful either.
> 
> Dave

  ______   Best Regards,
|__  __/                  Michael Schmidt
    ||                   Software Engineer
    ||echnologic Systems (EmbeddedARM.com)
    || (480)    16610 East Laser Drive #10
    |/ 837-5200   Fountain Hills, AZ 85268
        http://oz.embeddedarm.com/~michael

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/