[Top] [All Lists]

Re: R-44 issue-geek reply

Subject: Re: R-44 issue-geek reply
From: "Jez" tempjez
Date: Sat Jun 23, 2012 1:24 am ((PDT))
its definitely something between roland & the dpa's - its a new unit & it a=
lso does it on the R-26 (also new).

ta anyway.

--- In  "Mike Rooke" <> wrote:
> Using an XLR plug, build a simple tester with 150 Ohm between pins 2&3, 1=
 unconnected - plug that in and wiggle it around in all of the R44's socket=
s. If you notice any noise then I would suspect the sockets are worn or hav=
e contact issues. Is the R44 brand new? if not then is its history known? I=
f its new then I would suggest sending it back and trying the replacement w=
ith the DPA's. If the outcome is the same your out of luck and the magic be=
tween DPA and Roland isn't going to happen.
> -MIke.

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU