Re: New here, with question about phantom power rigs

["Rob Danielson" danielson_audio]

Hi Andy--

I believe one can use just one channel of the Art PII with a temporary cabl=
e:=C2=A0=C2=A0Connect NT1-A to Channel 1. In the wiring of the XLR connecto=
r to the Art Phamtom II=C2=A0Ch1's output,=C2=A0solder a jumper lead from=
=C2=A0pin #1 (ground) to Pin #3 (Signal Low).=C2=A0Pin #2 goes to the Tip a=
nd the Ring of the 3.5mm Mic PLug and=C2=A0the ground from the XLR=C2=A0goe=
s to the sleeve (ground)=C2=A0on the 3.5mm plug=C2=A0. This should=C2=A0sen=
d=C2=A0the mic to Left and Right inputs of the M10. Rob D.