naturerecordists
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: New here, with question about phantom power rigs

from [ourobouros2k2] [Permanent Link][Original]
Subject: Re: New here, with question about phantom power rigs
From: "ourobouros2k2" ourobouros2k2
Date: Sun Jul 4, 2010 1:22 pm ((PDT)) 

I was wondering if the following would be a feasible 1 mic solution..
NT1A
Art phantom 3 single channel phantom power box...
Samson S-Split
adapter cable
M10 recorder....

If that was feasible I could hit the ground running in a short time. I coul=
d always add another mic and upgrade to dual channel phantom power later on=
...

thanks
Andy
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: New here, with question about phantom power rigs, Scott Fraser
Next by Date:  Re: New here, with question about phantom power rigs, Rob Danielson
Previous by Thread:  Re: New here, with question about phantom power rigs, Scott Fraser
Next by Thread:  Re: New here, with question about phantom power rigs, Rob Danielson
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU