Hi Bruce,
"Bruce Wilson" <> wrote:
> The 722 has to different M/S decoders, one for recording, one for the
> headphones. To set M/S for recording go to the menu, entry 26, where
you can
> set "linked" for recording each channel separately,
I'm confused. Wouldn't "linked" be recording them together?
> or "linked, M/S" for
> decoding prior to recording.
And this would result in a decoded L/R stereo file being recorded?
>
> Headphone M/S decode is set using the scroll knob on the right side
of the
> unit, turn 'till you see one of the "MS x,x" settings.
>
> The manual says not to use both at the same time or you will hear
the raw
> channels again (encoding and decoding M/S is exactly the same thing,
so if
> you decode the recording, then decode the headphones, you are back
to what
> you started with.
Got it. That makes sense.
thanks, bruce
>
> Someone else will need to help you with the computer program.
>
> Bruce Wilson KF7K
> http://science.uvsc.edu/wilson
|