[Top] [All Lists]

Re: M/S decoding help

Subject: Re: M/S decoding help
From: "Tim Nielsen" supernielsen
Date: Fri Jul 7, 2006 11:37 pm (PDT)
On the 722, in Linked MS mode, the top pot controls overall volume of  
BOTH mics. The second bottom pot controls ratio of Mid to Side. So  
all the way to the left, and it's mid only (mid mic is recorded  
equally to both channels, dual-mono). All the way to the right is  
side only. 12 oclock is 1:1 ratio, or 90 degree stereo roughly.

So if you use Linked MS, set the bottom pot to 12 oclock (the LCD  
screen will read 'C' for center, meaning you've got the pot in the  
center, where you want it).

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU