Re: M/S decoding help

["Bruce Wilson" bruceumba]

The 722 has to different M/S decoders, one for recording, one for the 
headphones. To set M/S for recording go to the menu, entry 26, where you can 
set "linked" for recording each channel separately, or "linked, M/S" for 
decoding prior to recording.

Headphone M/S decode is set using the scroll knob on the right side of the 
unit, turn 'till you see one of the "MS x,x" settings.

The manual says not to use both at the same time or you will hear the raw 
channels again (encoding and decoding M/S is exactly the same thing, so if 
you decode the recording, then decode the headphones, you are back to what 
you started with.

Someone else will need to help you with the computer program.

Bruce Wilson KF7K
http://science.uvsc.edu/wilson