--- In "wimpunk" <> wrote:
>
> --- In Eddie Dawydiuk <eddie@> wrote:
> >
> > Hello,
> >
> > > I would be pretty surprised if it was a hardware problem. I tried a
> > > second one and I got the same result.
> >
> > I can think of two possible problems that would cause this
failure, the
> > CPLD was not programmed, or there is a problem with the drivers
you are
> > using. I've put our most recent drivers(I've verified they work)
on our
> > ftp site here
> >
> > ftp://oz.embeddedarm.com/tmp/tsuart0.o
> > ftp://oz.embeddedarm.com/tmp/tsuart-bat3.o
> >
> > Try the drivers above, if you still see the same issue and would
like to
> > troubleshoot the problem further download the following utility.
> >
> > ftp://oz.embeddedarm.com/ts-arm-linux-cd/binaries/ts-utils/peek8
> >
> > Then with JP1 and JP2 removed(on your TS-Bat3) run the following
command
> > it should print 0x28 if the CPLD has been programmed.
> >
> > peek8 0x11e00100
> >
> > e.g.
> >
> > :root]#peek8 0x11e00100
> > 0x28
> >
> > //Eddie
> >
>
> Eddie,
>
> I get:
>
> $ ./peek8 0x11e00100
> 0x7
>
> Regards,
>
> wimpunk.
>
Little correction.
With the TS-SER4 removed I get 0x0
wimpunk.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|