--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > I would be pretty surprised if it was a hardware problem. I tried a
> > second one and I got the same result.
>
> I can think of two possible problems that would cause this failure, the
> CPLD was not programmed, or there is a problem with the drivers you are
> using. I've put our most recent drivers(I've verified they work) on our
> ftp site here
>
> ftp://oz.embeddedarm.com/tmp/tsuart0.o
> ftp://oz.embeddedarm.com/tmp/tsuart-bat3.o
>
> Try the drivers above, if you still see the same issue and would like to
> troubleshoot the problem further download the following utility.
>
> ftp://oz.embeddedarm.com/ts-arm-linux-cd/binaries/ts-utils/peek8
>
> Then with JP1 and JP2 removed(on your TS-Bat3) run the following command
> it should print 0x28 if the CPLD has been programmed.
>
> peek8 0x11e00100
>
> e.g.
>
> :root]#peek8 0x11e00100
> 0x28
>
> //Eddie
>
Eddie,
I get:
$ ./peek8 0x11e00100
0x7
Regards,
wimpunk.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|