| To: | |
|---|---|
| Subject: | Re: [ts-7000] Re: Controlling TS-BAT3 |
| From: | Eddie Dawydiuk <> |
| Date: | Wed, 6 Dec 2006 14:03:32 -0700 (MST) |
Hello,
> Eddie, i got the 0x0 with no other peripherals connected.
It could be a problem with the PC/104 bus on the TS-7260 or the TS-Bat3
boards. If you have another TS-7xxx board you could run this same peek8
command, otherwise use the RMA you received to return the boards.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: reinstalling mtdblock1, Yan Seiner |
|---|---|
| Next by Date: | [ts-7000] Re: new TS-7000 bootloader (Linux booting Linux), Jesse Off |
| Previous by Thread: | [ts-7000] Re: Controlling TS-BAT3, wimpunk |
| Next by Thread: | Re: [ts-7000] Re: Controlling TS-BAT3, Eddie Dawydiuk |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU