Hello,
> $ ./peek8 0x11e00100
> 0x7
Do you have any other PC/104 boards stacked, other than the TS-Bat3? If
not and you do not have JP1 or JP2 present this would imply the CPLD on
the TS-BAT3 is not programmed properly, or you have a problem with the
PC/104 bus on the TS-7260 you are using. If you have another TS-7260 you
could try running the same command from another TS-7260 to see if you
get the same results. If you do it would be very unlikely you have two
TS-7260s with a bad PC/104 bus. If you don't have another TS-7260 I'd
recommend returning the TS-7260 as well as the TS-Bat3 boards. I believe
Michael contacted you off list with an RMA, you can use this number to
return the boards to us.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|