Re: [ts-7000] Controlling TS-BAT3

[Jason Stahls <>]

Michael Schmidt wrote:

Hi List,

I finally got my TS-7260 up and running powered by the TS-BAT3 by
using JP7 on the mainboard but I can't control the power unit.  Trying
to insert the module I get:

$ insmod tsuart-bat3
Using /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart-bat3.o
insmod: init_module: tsuart-bat3: Operation not permitted

Anyone any suggestion what I'm overlooking?
    

I assume you're running the above command as root... :-)

You might check if the tsuart0.o module is loaded...  if so, can you send 
the output of the 'dmesg' command?

  

And on that note, using modprobe would (read: should) install any modules extra modules that it requires.

Jason __._,_.___

SPONSORED LINKS

Single board computer	Hardware	Linux os
Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___