Re: [ts-7000] Controlling TS-BAT3

["Michael Schmidt" <>]

> Hi List,
>
> I finally got my TS-7260 up and running powered by the TS-BAT3 by
> using JP7 on the mainboard but I can't control the power unit.  Trying
> to insert the module I get:
>
> $ insmod tsuart-bat3
> Using /lib/modules/2.4.26-ts11/kernel/drivers/serial/tsuart-bat3.o
> insmod: init_module: tsuart-bat3: Operation not permitted
>
> Anyone any suggestion what I'm overlooking?

I assume you're running the above command as root... :-)

You might check if the tsuart0.o module is loaded...  if so, can you send 
the output of the 'dmesg' command?

>
> Tnx,
>
> wimpunk.

Regards,

Michael



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/