--- In Jim Jackson <> wrote:
>
>
>
> On Thu, 16 Nov 2006, soniathakur3 wrote:
>
> > --- In "Don W. Carr" <doncarr@> wrote:
> > >
> > > Of course the simplest of all is to just open a terminal on the
> > TS7xxx with
> > > ssh or telnet, and then run your program that reads the values
every 5
> > > seconds and prints them to standart out.
> >
> >
> > For this i will need to configure the timer. How can i do that for
> > this board?
>
> You've not been paying attention.
>
> You have been pointed at the command line "sleep" as in "sleep 5"
pauses
> for 5 secs, and the C function "sleep" as in "sleep(5); that does
> ditto in a C program.
>
> I hope you are going to credit the good folks on this list in your
project
> write up :-0
I am going to give all of you credit for helping me in my project in
my write up.Thank you so much.
sonia
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|