Re: [ts-7000] Re: send data to PC through the ethernet port

["Don W. Carr" <>]

Of course the simplest of all is to just open a terminal on the TS7xxx with ssh or telnet, and then run your program that reads the values every 5 seconds and prints them to standart out.

Don.

On 11/16/06, Yan Seiner <> wrote:

--- In ts-7000%40yahoogroups.com, "soniathakur3" <> wrote:
>
>
> Hi,
>
> I have TS7200 board, I need to send data to PC from the board after
> every 5 secs. This data is the data i collect from the external
> ADC.Now, i have ADC working ,but dont have any idea of how to display
> it on PC through ethernet port after every 5 secs.
>
> What all do i need to do?
>

On the TS7200 side, build or install netcat. Then use nc to send the
data to the application on the PC side.

If your PC is running linux, then either run netcat on the port full
time, or simply run a script like "cat - >> /tmp/data.log" via inetd
on the appropriate port.

QED..... :-)

--Yan

-- 
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___