[ts-7000] Re: send data to PC through the ethernet port

["soniathakur3" <>]

--- In  "Don W. Carr" <> wrote:
>
> Of course the simplest of all is to just open a terminal on the
TS7xxx with
> ssh or telnet, and then run your program that reads the values every 5
> seconds and prints them to standart out.


For this i will need to configure the timer. How can i do that for
this board?

sonia

> 
> On 11/16/06, Yan Seiner <> wrote:
> >
> >   --- In  <ts-7000%40yahoogroups.com>,
> > "soniathakur3" <soniathakur3@> wrote:
> > >
> > >
> > > Hi,
> > >
> > > I have TS7200 board, I need to send data to PC from the board after
> > > every 5 secs. This data is the data i collect from the external
> > > ADC.Now, i have ADC working ,but dont have any idea of how to
display
> > > it on PC through ethernet port after every 5 secs.
> > >
> > > What all do i need to do?
> > >
> >
> > On the TS7200 side, build or install netcat. Then use nc to send the
> > data to the application on the PC side.
> >
> > If your PC is running linux, then either run netcat on the port full
> > time, or simply run a script like "cat - >> /tmp/data.log" via inetd
> > on the appropriate port.
> >
> > QED..... :-)
> >
> > --Yan
> >
> >  
> >
> 
> 
> 
> -- 
> Dr. Don W. Carr
> J. G. Montenegro 2258
> Guadalajara, Mexico
> +52-333-630-0704
> +52-333-836-4500 ext 2930
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/