On Thu, 16 Nov 2006, Yan Seiner wrote:
> On the TS7200 side, build or install netcat. Then use nc to send the
> data to the application on the PC side.
>
> If your PC is running linux, then either run netcat on the port full
> time, or simply run a script like "cat - >> /tmp/data.log" via inetd
> on the appropriate port.
>
> QED..... :-)
>
Netcat can be built into busybox! Can't remember if its built into the
default setup as provided by Technologics - would seem an omission, if it
was. BTW look for "nc" as the command name for netcat.
But you don't need netcat. The board has everything needed as supplied,
inetd is your friend - honest. It is the best one of the unix worlds best
kept sercrets for simply providing network services.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|