Just use the nanosleep() system call to sleep until the next interval. You can fix it to sleep slightly less time to make up for the time you spend reading the IO and printing it to standard output, thus the average time will be almost exactly the 5 seconds you want, but each one could vary by tens of milliseconds. I can give you some code that figures out how long you spent processing, displaying, etc, and then calculate the next sleep time if you want.
Don.
On 11/16/06, soniathakur3 <> wrote:
--- In ts-7000%40yahoogroups.com, "Don W. Carr" <> wrote:
>
> Of course the simplest of all is to just open a terminal on the
TS7xxx with
> ssh or telnet, and then run your program that reads the values every 5
> seconds and prints them to standart out.
For this i will need to configure the timer. How can i do that for
this board?
sonia
>
> On 11/16/06, Yan Seiner <> wrote:
> >
> > --- In ts-7000%40yahoogroups.com <ts-7000%40yahoogro
ups.com>,
> > "soniathakur3" <soniathakur3@> wrote:
> > >
> > >
> > > Hi,
> > >
> > > I have TS7200 board, I need to send data to PC from the board after
> > > every 5 secs. This data is the data i collect from the external
> > > ADC.Now, i have ADC working ,but dont have any idea of how to
display
> > > it on PC through ethernet port after every 5 secs.
> > >
> > > What all do i need to do?
> > >
> >
> > On the TS7200 side, build or install netcat. Then use nc to send the
> > data to the application on the PC side.
> >
> > If your PC is running linux, then either run netcat on the port full
> > time, or simply run a script like "cat - >> /tmp/data.log" via inetd
> > on the appropriate port.
> >
> > QED..... :-)
> >
> > --Yan
> >
> >
> >
>
>
>
> --
> Dr. Don W. Carr
> J. G. Montenegro 2258
> Guadalajara, Mexico
> +52-333-630-0704
> +52-333-836-4500 ext 2930
>
-- Dr. Don W. Carr J. G. Montenegro 2258 Guadalajara, Mexico +52-333-630-0704 +52-333-836-4500 ext 2930
__._,_.___
![]()
SPONSORED LINKS
__,_._,___
|