naturerecordists
[Top] [All Lists]

Re: XLR Cable Connection

Subject: Re: XLR Cable Connection
From: "Tom Williams" pterodax
Date: Wed Apr 20, 2011 11:13 am ((PDT))
I think the stuff AT supply with their stereo mics is Mogami 3106 or
similar: http://www.mogamicable.com/category/bulk/microphone/stereo/

Markertek sell it in the USA but I've never found a UK stockist.

All the best,

Tom



On 20 April 2011 18:24, Gregory O'Drobinak <>wrote=
:

>
>
> I agree with Dan. I have two long cables made with Star Quad for various
> Audio
> Technica X/Y mics and I am happy with the results.
>
> I made them myself using Neutirk connectors. Don't skimp on these!
>
> BTW, I looked for some commercially made single-jacket stereo cables and
> found
> that nearly all of them used the Star Quad as stereo cable. Audio Technic=
a
> supplied some kind of cable that looks like two Siamese cables attached
> side by
> side so that each signal pair has its own shield, but I don't know of a
> supplier
> for this stuff.
>
> -Greg
>
> ________________________________
> From: Dan Dugan <>
> To: 
> Sent: Wed, April 20, 2011 11:49:45 AM
> Subject: Re: [Nature Recordists] Re: XLR Cable Connection
>
>
> > Star Quad is intended as mono cable. Use for stereo is outside the
> intended
> >design.
>
> Yes, but it works. Probably some low-level crosstalk at 20KHz, but who
> cares.
>
> -Dan
>
>
>
>
>









<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU