My Sharp - MD-SR50 - is almays on manual recording, if you have set it once
for manual - even if you switch it off or remove the batteries.
Klas
At 08:40 2002-07-22 -0700, you wrote:
>> 2/ You have to pause to set the recording level.
>
>My new-model Sony MZ-R910 works this way: When you start a recording
>session, you have to pause, then select "RecVolume" via the scroll wheel,
>setting it to "ManualREC". The scroll wheel then acts as a volume control.
>After you then un-pause, causing the recording to begin, the scroll wheel
>*continues* to act as a manual recording volume level control. You can
>pause and un-pause at will, and the scroll wheel still functions as
>described.
>
>Unfortunately, once you Stop (as opposed to Pause) a recording session, the
>unit reverts back to automatic recording level. So when you initiate the
>next session, you must go through the process of using the scroll wheel to
>set RecVolume to ManualREC again.
>
>Do the Sharp etc. act better?
>
>Larry
>
>
>
>
>
>To unsubscribe from this group, send an email to:
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
This outgoing e-mail is scanned for viruses with Norton 2002
Telinga Microphones, Botarbo,
S-748 96 Tobo, Sweden.
Phone & fax int + 295 310 01
email:
org. no SE440130067001
________________________________________________________________________
________________________________________________________________________
|