Re: [ts-7000] Re: TS-7200 can't interrupt redboot?

[Eddie Dawydiuk <>]

> But I can't get it to load hda1:/boot/vmlinuz. I tried this command
> (which wasn't in the manual but I found in this list somewhere):
> 
> RedBoot> load -r -b 0x00218000 -m disk hda1:/boot/vmlinuz            
>                
> e2fs_open: e2fs_inode_lookup failed                                  
>                
> Can't load 'hda1:/boot/vmlinuz': Can't open file                     

Take a look at the manual, it should clear things up. 
http://www.embeddedarm.com/Manuals/linuxarm-guide-rev2.2.pdf


-- 
Best Regards,
________________________________________________________________
  Eddie Dawydiuk, Technologic Systems | voice:  (480) 837-5200
  16610 East Laser Drive Suite 10     | fax:    (480) 837-5300
  Fountain Hills, AZ 85268            | web: www.embeddedARM.com


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/