jcunningham63 wrote:
> I just setup a new TS-7200 with the 512M CF Debian image. I've read
> the documentation and have been trying to C-c to within the first
> second via a minicom console in order to issue this command:
[snip]
> Unfortunately, it does not recognize my control-C and boots the
> onboard flash every time. Looking at the console history I see this:
I had the same problem. I think it has to do the terminal settings regarding
Control-C. I tried using stty to change some settings but it didn't seem to
help. The only way I could use Control-C to stop part of the boot process was
when I used Telix from a DOS box in Windows. Fortunately, my need to stop the
boot process early went away.
I later noticed that the schematic for the TS-7250 board mentioned that
installing a certain jumper would also do the same thing as using Control-C.
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
| Try to assimilate the world!"
#include <disclaimer/favourite> | -Pinkutus & the Borg
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|