I just setup a new TS-7200 with the 512M CF Debian image. I've read
the documentation and have been trying to C-c to within the first
second via a minicom console in order to issue this command:
RedBoot> load -r -b 0x00218000 -m disk hda1:/boot/vmlinuz
Unfortunately, it does not recognize my control-C and boots the
onboard flash every time. Looking at the console history I see this:
== Executing boot script in 0.100 seconds - enter ^C to abort
RedBoot> fis load vmlinux
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
So, I'm guessing 0.100 seconds is too fast to be interrupted?
How do I interrupt this boot process? 0.100 seconds isn't a lot of
time. I spent the last two hours going back through this list,
figuring this must be a common problem with an easy solution but
haven't seen a thing about it. Is this a new problem?
Any help would be appreciated.
Jeff
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|