To: | |
---|---|
Subject: | Re: [ts-7000] TS-7200 can't interrupt redboot? |
From: | Randy Hunsaker <> |
Date: | Thu, 7 Jun 2007 10:25:48 -0700 (PDT) |
Jeff,
I had the same problem with a TS-7260 board. It actually wasn't the board at all - it was the fact that I had flow control turned on in Hyper Terminal. According to TS, you must turn off all flow control on the RS-232 connection you are using to monitor the console port. Once I truned this off, I could use Ctrl-C to interrupt RedBoot.
Good luck,
Randy
----- Original Message ----
From: Doug Kehn <> To: Sent: Thursday, June 7, 2007 8:37:47 AM Subject: Re: [ts-7000] TS-7200 can't interrupt redboot? Hi Jeff, Shape Yahoo! in your own image. Join our Network Research Panel today! __._,_.___
SPONSORED LINKS
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [ts-7000] Re: TS-7200 / ARM9 speed issue - question, Jason Stahls |
---|---|
Next by Date: | [ts-7000] New file uploaded to ts-7000, ts-7000 |
Previous by Thread: | Re: [ts-7000] TS-7200 can't interrupt redboot?, Kevin Cozens |
Next by Thread: | [ts-7000] Re: TS-7200 can't interrupt redboot?, jcunningham63 |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU