Hi Jeff,
--- jcunningham63 wrote:
> I just setup a new TS-7200 with the 512M CF Debian
> image. I've read
> the documentation and have been trying to C-c to
> within the first
> second via a minicom console in order to issue this
> command:
>
> RedBoot> load -r -b 0x00218000 -m disk
> hda1:/boot/vmlinuz
>
> Unfortunately, it does not recognize my control-C
> and boots the
> onboard flash every time. Looking at the console
> history I see this:
>
> == Executing boot script in 0.100 seconds - enter ^C
> to abort
>
> RedBoot> fis load vmlinux
>
>
> RedBoot> exec -c "console=ttyAM0,115200
> root=/dev/mtdblock1"
>
>
> So, I'm guessing 0.100 seconds is too fast to be
> interrupted?
>
> How do I interrupt this boot process? 0.100 seconds
> isn't a lot of
> time. I spent the last two hours going back through
> this list,
> figuring this must be a common problem with an easy
> solution but
> haven't seen a thing about it. Is this a new
> problem?
>
> Any help would be appreciated.
>
Have you tried holding down Ctrl-C and then powering
up your board?
Regards,
...doug
____________________________________________________________________________________
Moody friends. Drama queens. Your life? Nope! - their life, your story. Play
Sims Stories at Yahoo! Games.
http://sims.yahoo.com/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|