Hello,
> We are using the 7400 and seems the SD has been corrupted. I searched
> this forum and only found about copying an image.
>
> I tried looking here: The procedure is documented here
> http://www.embeddedarm.com/epc/fastboot.htm.
> but page does not seem to exist.
>
> Can some one point me to a document on reloaded the SD as it comes from
> Embeddedarm.
The link seems to be working fine for me. You'll also want to see the
following thread.
http://tech.groups.yahoo.com/group/ts-7000/message/6357
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|