Hello,
> Okay, if I copy and paste that link in it worked. Loaded the SD with
> the image and all looks good. thanks for that.
>
> I have another problem. When trying to boot (jumper not set for
> boot) I get the following:
>>> TS-SDBOOT - built Oct 17 2006
>>> Copyright (c) 2006, Technologic Systems
> .
> .
> .
> It just hangs after that. I found the fix for the 7400 where you
> replace the sdcard.o and renaming linuxrc2.7400 to linuxrc-sdroot.
>
> After doing that I get the same thing. Am I missing something?
>
> I am not sure if I am doing it correctly. Not much description in
> that readme file. I boot jumper and get the following:
There isn't much to it. You might want to try running md5sum on the
linuxrc file/kernel on your board and the ones for the TS-7400 SDBOOT to
ensure you have replaced both files...
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>> TS-SPIFLASHBOOT - built Oct 3 2006
>>> Copyright (c) 2006, Technologic Systems
> .
> .
> .
> Finished booting in 3.10 seconds
> Type 'tshelp' for help
> $
>
> I then run insmod -q -f /sdcard.o and then mount the sdcard. This is
> so I can get to those two files that need to be updated that I have
> placed on the SD card.
> But since it is the flash, I think I loose what I copy over. How can
> I update the 2 files to fix this problem?
>
> I followed the directions from this link:
> ftp://oz.embeddedarm.com/sdboot_7400/
>
> Thanks,
> Walter
>
> --- In Eddie Dawydiuk <> wrote:
>> Hello,
>>
>>> We are using the 7400 and seems the SD has been corrupted. I
> searched
>>> this forum and only found about copying an image.
>>>
>>> I tried looking here: The procedure is documented here
>>> http://www.embeddedarm.com/epc/fastboot.htm.
>>> but page does not seem to exist.
>>>
>>> Can some one point me to a document on reloaded the SD as it
> comes from
>>> Embeddedarm.
>> The link seems to be working fine for me. You'll also want to see
> the
>> following thread.
>>
>> http://tech.groups.yahoo.com/group/ts-7000/message/6357
>>
>> --
>> Best Regards,
>> ________________________________________________________________
>> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
>> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
>> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|