ts-7000
[Top] [All Lists]

[ts-7000] Re: rebuilding the SD image

To:
Subject: [ts-7000] Re: rebuilding the SD image
From: "walter woodrow" <>
Date: Mon, 11 Jun 2007 19:50:34 -0000
Okay, if I copy and paste that link in it worked.  Loaded the SD with 
the image and all looks good.  thanks for that.

I have another problem.  When trying to boot (jumper not set for 
boot) I get the following:
>> TS-SDBOOT - built Oct 17 2006
>> Copyright (c) 2006, Technologic Systems
.
.
.
It just hangs after that.  I found the fix for the 7400 where you 
replace the sdcard.o and renaming linuxrc2.7400 to linuxrc-sdroot.

After doing that I get the same thing.  Am I missing something?

I am not sure if I am doing it correctly.  Not much description in 
that readme file.  I boot jumper and get the following:
>> TS-SPIFLASHBOOT - built Oct  3 2006
>> Copyright (c) 2006, Technologic Systems
.
.
.
Finished booting in 3.10 seconds
Type 'tshelp' for help
$

I then run insmod -q -f /sdcard.o and then mount the sdcard.  This is 
so I can get to those two files that need to be updated that I have 
placed on the SD card.
But since it is the flash, I think I loose what I copy over.  How can 
I update the 2 files to fix this problem?

I followed the directions from this link:
ftp://oz.embeddedarm.com/sdboot_7400/

Thanks,
Walter

--- In  Eddie Dawydiuk <> wrote:
>
> Hello,
> 
> > We are using the 7400 and seems the SD has been corrupted.  I 
searched 
> > this forum and only found about copying an image.
> > 
> > I tried looking here: The procedure is documented here
> > http://www.embeddedarm.com/epc/fastboot.htm.
> > but page does not seem to exist.
> > 
> > Can some one point me to a document on reloaded the SD as it 
comes from 
> > Embeddedarm.
> 
> The link seems to be working fine for me. You'll also want to see 
the 
> following thread.
> 
> http://tech.groups.yahoo.com/group/ts-7000/message/6357
> 
> -- 
> Best Regards,
> ________________________________________________________________
>   Eddie Dawydiuk, Technologic Systems | voice:  (480) 837-5200
>   16610 East Laser Drive Suite 10     | fax:    (480) 837-5300
>   Fountain Hills, AZ 85268            | web: www.embeddedARM.com
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU