Hello,
> With the jumper on it comes up in the SPIFLASHBOOT. I have the
> follwoing checksums:
> TS-SPIFLASHBOOT - built Oct 3 2006
> 4118fe72efa55f8a811addb8b08eb27f sdcard.o
> eb3eb2403be1bb1880e44f11c3542411 linuxrc
> d10ec392e3b8c4b37a1c6fe45ec181e6 linuxrc-sdroot
> eb3eb2403be1bb1880e44f11c3542411 linuxrc-fastboot
> c44d06ef7a04b930704f16be7e8ca503 linuxrc-usbroot
> 39260fd1abdd6b45192835bd0e24b6e6 linuxrc-nfsroot
> dc47ac4c89b59075bbef483bd280b774 linuxrc-mtdroot
>
> when I type in exit and load in the SD to get to the place where I
> copied the two files from the web site.
> 4118fe72efa55f8a811addb8b08eb27f sdcard.o
> 5b1fcc706f081fe623a058db4c34c6e4 linuxrc2.7400
It looks like you have the boot jumper on(e.g. SPIFLASHBOOT). To clarify
what the different bootroms do. The SPIFLASHBOOT is the bootrom used to
boot to the TS-9441, it reads the kernel and initial ramdisk from the
serial flash on the TS-9441. FLASHBOOT is the default bootrom shipped on
the TS-7400, this bootrom reads the kernel and initial ramdisk from the
onboard NAND flash(e.g. on a TS-7400). SDBOOT will read the kernel and
initial ramdisk from the SD card. As a result you'll want to put the SD
card driver and initial ramdisk on the SD card...
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
> --- In Eddie Dawydiuk <> wrote:
>> Hello,
>>
>>> Okay, if I copy and paste that link in it worked. Loaded the SD
> with
>>> the image and all looks good. thanks for that.
>>>
>>> I have another problem. When trying to boot (jumper not set for
>>> boot) I get the following:
>>>>> TS-SDBOOT - built Oct 17 2006
>>>>> Copyright (c) 2006, Technologic Systems
>>> .
>>> .
>>> .
>>> It just hangs after that. I found the fix for the 7400 where you
>>> replace the sdcard.o and renaming linuxrc2.7400 to linuxrc-sdroot.
>>>
>>> After doing that I get the same thing. Am I missing something?
>>>
>>> I am not sure if I am doing it correctly. Not much description
> in
>>> that readme file. I boot jumper and get the following:
>> There isn't much to it. You might want to try running md5sum on the
>> linuxrc file/kernel on your board and the ones for the TS-7400
> SDBOOT to
>> ensure you have replaced both files...
>>
>> --
>> Best Regards,
>> ________________________________________________________________
>> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
>> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
>> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>
>>
>>>>> TS-SPIFLASHBOOT - built Oct 3 2006
>>>>> Copyright (c) 2006, Technologic Systems
>>> .
>>> .
>>> .
>>> Finished booting in 3.10 seconds
>>> Type 'tshelp' for help
>>> $
>>>
>>> I then run insmod -q -f /sdcard.o and then mount the sdcard.
> This is
>>> so I can get to those two files that need to be updated that I
> have
>>> placed on the SD card.
>>> But since it is the flash, I think I loose what I copy over. How
> can
>>> I update the 2 files to fix this problem?
>>>
>>> I followed the directions from this link:
>>> ftp://oz.embeddedarm.com/sdboot_7400/
>>>
>>> Thanks,
>>> Walter
>>>
>>> --- In Eddie Dawydiuk <eddie@> wrote:
>>>> Hello,
>>>>
>>>>> We are using the 7400 and seems the SD has been corrupted. I
>>> searched
>>>>> this forum and only found about copying an image.
>>>>>
>>>>> I tried looking here: The procedure is documented here
>>>>> http://www.embeddedarm.com/epc/fastboot.htm.
>>>>> but page does not seem to exist.
>>>>>
>>>>> Can some one point me to a document on reloaded the SD as it
>>> comes from
>>>>> Embeddedarm.
>>>> The link seems to be working fine for me. You'll also want to
> see
>>> the
>>>> following thread.
>>>>
>>>> http://tech.groups.yahoo.com/group/ts-7000/message/6357
>>>>
>>>> --
>>>> Best Regards,
>>>> ________________________________________________________________
>>>> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
>>>> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
>>>> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|