Mike,
You might like to experiment using the LS10 set on Low Sensitivity,
volume 10. I do find these settings give better results (less noise)
than when using High Sensitivity, even when the levels are boosted
later. These settings have given me good results using the Telinga
LS10 stereo mic which Klas produced about 12 months ago.
Question for Klas - what is the difference between the LS10 stereo
mic that I have, and the new PIP mics?
Vicki
On 26/03/2010, at 2:32 PM, walunit wrote:
>
>
> Hello John,
>
> Thanks so much for the suggestion and images. I'm going to give
> this a go. I suspect it will work well with these nice new mics.
>
> Regarding using a different recorder -- That is a fine idea. For
> now I have the LS-10 and an SD 722 work with. I will need to sort
> out mic power to try the SD 722 with these new mics at some point.
>
> -Mike
>
> --- In "JLMoore3"
> <> wrote:
>>
>> Mike,
>>
>> You might consider making a miniature Jecklin disc for your Telinga
>> Clip-Ons... something like this:
>> DIY Jecklin <http://sound.flyingmonkeystudio.com/2009/02/more-diy-
>> toys/>
>>
>> I built a pair of mini omni mics using a pair of Primo BT-EM158
>> capsules
>> from Frogloggers.com <http://www.frogloggers.com/FORMgallery4.htm>
>> which work quite well with my Tascam DR-07, but am now considering
>> moving up to the Telingas after hearing your results!
>>
>> John Moore
>> Flying Monkey Studio - Soundblog <http://
>> sound.flyingmonkeystudio.com>
>>
>>
>>
>>
>
>
>
>
|