Subject: | Re: 24 bit vs 16 bit recordings |
---|---|
From: | "Walter Knapp" waltknapp |
Date: | Sun May 20, 2007 8:36 am ((PDT)) |
Posted by: "Marc Myers" > > Normalizing brings up the sound floor (the noise in the recording) and so > increases the "hiss" of the recording. Because digital recording clips > completely, most recordists tend to be conservative and record at -6 to -12 > db to give themselves enough headroom. Normalize and you end up with loudest > sounds at 0 and the noise pulled up along with it. If instead you are perfect and record with no headroom (the equivalent of normallizing, but during recording) the result will be the same, the mic and pre noise will be brought up too. The only way you get less noise with increased volume is use a quieter mic and pre that don't compromise sensitivity to do it. (or get into filtering the noise out) Walt |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: 24 bit vs 16 bit recordings, Walter Knapp |
---|---|
Next by Date: | Re: 24 bit vs 16 bit recordings, Walter Knapp |
Previous by Thread: | Re: 24 bit vs 16 bit recordings, Walter Knapp |
Next by Thread: | Re: 24 bit vs 16 bit recordings, Walter Knapp |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU