naturerecordists
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: X-Y -> M-S & Perfect Reversals

from [Rob Danielson] [Permanent Link][Original]
Subject: Re: X-Y -> M-S & Perfect Reversals
From: "Rob Danielson" danielson_rob
Date: Tue Mar 13, 2007 9:49 am ((PDT)) 
At 1:59 PM +0000 3/13/07, John Lundsten wrote:

Some language confusion, perhaps. When I read this:

>do what you like on 1st plug (to get a LR type stereo sound you like)
>  To turn it back to MS again 2nd plug must have same gains
>J
'This is what I interpret you are wanting in the two plug settings:
http://www.uwm.edu/~type/audio-reports/M-SDecodeAccuracyTest/+matrix_2ndPlu=
gSettingsMatchFirstNoGain/+matrix_NonDefaults_2.jpg

(test #2)
Rob D.


--
Rob Danielson
Peck School of the Arts
University of Wisconsin-Milwaukee
http://www.uwm.edu/~type/audio-art-tech-gallery/
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: X-Y -> M-S & Perfect Reversals, Lou Judson
Next by Date:  Re: X-Y -> M-S & Perfect Reversals, John Lundsten
Previous by Thread:  Re: X-Y -> M-S & Perfect Reversals, Lou Judson
Next by Thread:  Re: X-Y -> M-S & Perfect Reversals, John Lundsten
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU