naturerecordists
[Top] [All Lists]

Re: MKH vs Telinga EM23 noise

Subject: Re: MKH vs Telinga EM23 noise
From: "Rob Danielson" danielson_rob
Date: Thu Aug 31, 2006 8:00 pm (PDT)
Hi Scott- We'll, something odd is going on. Is just the 40/30 pair
going through through the Rolls and the em-23 running on PIP or are
both running through the PB224? Sure the batteries are fresh? If both
pairs are going through the Rolls, can you upload the M-S 40-30 rec
level "28" files un-decoded and un-normalized?   Rob D.

At 11:07 PM +0000 8/31/06, scottsherk27 wrote:
>I recently began experimenting with a Sennheiser MKH 30-40 M/S rig.
>I've been running this through the Rolls PB224 and then into a Sony
>RH10 Hi-MD.  I seem to be experiencing too much high-end noise,
>especially compared to what I'm used to with my pair of Telinga
>EM23's.  I've posted some crude test recording on my site.  I`ve
>recorded the same clock with both the EM23's and the MKH's with gain
>of 22 and 28 on the RH10.  I only normalized the files.  I would
>appreciate an assessment of this high-end noise.  Here is the page:
>
>http://tinyurl.com/hx9nq
>
>Thanks,
>Scott
>
>
>
>
>
>"Microphones are not ears,
>Loudspeakers are not birds,
>A listening room is not nature."
>Klas Strandberg
>Yahoo! Groups Links
>
>
>
>


--
Rob Danielson
Peck School of the Arts
University of Wisconsin-Milwaukee
http://www.uwm.edu/~type/audio-art-tech-gallery/





<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU