Subject: | MKH vs Telinga EM23 noise |
---|---|
From: | "scottsherk27" scottsherk27 |
Date: | Thu Aug 31, 2006 4:11 pm (PDT) |
I recently began experimenting with a Sennheiser MKH 30-40 M/S rig. I've been running this through the Rolls PB224 and then into a Sony RH10 Hi-MD. I seem to be experiencing too much high-end noise, especially compared to what I'm used to with my pair of Telinga EM23's. I've posted some crude test recording on my site. I`ve recorded the same clock with both the EM23's and the MKH's with gain of 22 and 28 on the RH10. I only normalized the files. I would appreciate an assessment of this high-end noise. Here is the page: http://tinyurl.com/hx9nq Thanks, Scott |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: New noisy mic amps!, Rob Danielson |
---|---|
Next by Date: | Re: MKH vs Telinga EM23 noise, Klas Strandberg |
Previous by Thread: | Re: New noisy mic amps!, Nick Roast |
Next by Thread: | Re: MKH vs Telinga EM23 noise, Klas Strandberg |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU