I used chrony, http://chrony.tuxfamily.org/ which compiled to a small
executable and was easy to use.
--- In "Prabhakar" <> wrote:
>
> hi,
>
> I used the crosstool-linux26-3.4.4-2005q3-2.tar.gz supplied by TS, also i
> have tested the sample programs using this compiler it is working properly.
> The NTP program not working properly. Do you have any procedures for
> compiling the ntp-4.2.6p5 using crosstool chain and loading into ARM
> processor. Please guide me.
>
> Thanks
> Prabhakar.k
>
> --- In Jason Stahls <jason@> wrote:
> >
> > On 2/21/2013 12:39 AM, Prabhakar wrote:
> > > Hi,
> > >
> > > I am new to embeded arm, we have purchased TS7400 board
> > > (Computer-on-Module with Ultra-Fast Linux Bootup ) from technologic, I
> > > have cross compiled the ntp-4.2.6p5 using ( arm-none-linux-gnueabi-gcc )
> > > compiler and loaded the cross compiled NTPD and ntpq files into TS7400
> > > board using sd card. Now when i try to run the NTPD it is giving error
> > > error as " Illegal Instruction". Unable to identify the cause for this
> > > error.
> > >
> > > Any one pl guide me how to solve the above issue.
> >
> > You setup your cross compiler wrong, :). Did you use the one supplied
> > by TS or roll your own? "Illegal Instruction" generally means the
> > binary isn't compiled for the CPU it's running on.
> >
> > --
> > Jason Stahls
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|