Re: [ts-7000] Procedure for loading and executing NTP Applications on TS7400 from embeded arm.

[Jason Stahls <>]

On 2/21/2013 12:39 AM, Prabhakar wrote:
> Hi,
>
> I am new to embeded arm, we have purchased TS7400 board (Computer-on-Module 
> with Ultra-Fast Linux Bootup ) from technologic, I have cross compiled the 
> ntp-4.2.6p5 using ( arm-none-linux-gnueabi-gcc ) compiler and loaded the 
> cross compiled NTPD and ntpq files into TS7400 board using sd card. Now when 
> i try to run the NTPD it is giving error error as " Illegal Instruction". 
> Unable to identify the cause for this error.
>
> Any one pl guide me how to solve the above issue.

You setup your cross compiler wrong, :).  Did you use the one supplied 
by TS or roll your own?  "Illegal Instruction" generally means the 
binary isn't compiled for the CPU it's running on.

-- 
Jason Stahls


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/