hi,
I used the crosstool-linux26-3.4.4-2005q3-2.tar.gz supplied by TS, also i have
tested the sample programs using this compiler it is working properly. The NTP
program not working properly. Do you have any procedures for compiling the
ntp-4.2.6p5 using crosstool chain and loading into ARM processor. Please guide
me.
Thanks
Prabhakar.k
--- In Jason Stahls <> wrote:
>
> On 2/21/2013 12:39 AM, Prabhakar wrote:
> > Hi,
> >
> > I am new to embeded arm, we have purchased TS7400 board (Computer-on-Module
> > with Ultra-Fast Linux Bootup ) from technologic, I have cross compiled the
> > ntp-4.2.6p5 using ( arm-none-linux-gnueabi-gcc ) compiler and loaded the
> > cross compiled NTPD and ntpq files into TS7400 board using sd card. Now
> > when i try to run the NTPD it is giving error error as " Illegal
> > Instruction". Unable to identify the cause for this error.
> >
> > Any one pl guide me how to solve the above issue.
>
> You setup your cross compiler wrong, :). Did you use the one supplied
> by TS or roll your own? "Illegal Instruction" generally means the
> binary isn't compiled for the CPU it's running on.
>
> --
> Jason Stahls
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|