That may not be of help, but have you tried to compile directly on the target?
I have written and compiled several small c programs directly on the TS-7553
and aside from compilation not being very fast, they run fine.
--- In "Prabhakar" <> wrote:
>
> Hi,
>
> I am new to embeded arm, we have purchased TS7400 board (Computer-on-Module
> with Ultra-Fast Linux Bootup ) from technologic, I have cross compiled the
> ntp-4.2.6p5 using ( arm-none-linux-gnueabi-gcc ) compiler and loaded the
> cross compiled NTPD and ntpq files into TS7400 board using sd card. Now when
> i try to run the NTPD it is giving error error as " Illegal Instruction".
> Unable to identify the cause for this error.
>
> Any one pl guide me how to solve the above issue.
>
> Thanks
> Prabhakar.k
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|