hello every:
I lost the original sd card boot image, so I have to create a new one.for the
TS-7260 SBC.
The TS7260 has already permanently modified the TS-7260 to boot to the SD card.
I have tried two sd card, one is sd impact 1 GB with 2 partition (ext2 1.6 mb
and 994 mb), the other one I used is 16 GB SDHC with one partition (ext2)
I followed these two links step by step, no error occurs:
http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
http://www.embeddedarm.com/about/resource.php?item=485
however, it is failed when I insert the new sd card into the TS7260 socket, the
minicom keeps showing:
>> TS-SDBOOT - built Aug 10
2009
>> Copyright (c) 2007, Technologic Systems
Could anyone gives some suggestions? Thanks very much,
Alex
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|