|
hi mike, i got my serial port program working correctly (problem 1), now i'm going to take your advice to launch it automatically at startup. kristeen From: Mike Dodd <> To: Sent: Tuesday, December 6, 2011 1:54 PM Subject: [ts-7000] Re: execute an embedded program at startup (newbie) Kristeen Palmer wrote: > > > hi russel, > thanks for responding. the answer is that i do not need to be attached > to the console. i wish linux to boot, then run my application which > serves as an ascii string command slave on com2. (my console defaults to > com1) Did you read my reply (msg # 21467) to your initial question? And also my reply (#21473) to your second question? If you try what I suggested, I think you'll find that your program does exactly what you want. -- Mike Mike Dodd Louisa County, VA USA http://mdodd.com ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: m("yahoogroups.com","ts-7000-digest");" href=""> m("yahoogroups.com","ts-7000-fullfeatured");" href=""> <*> To unsubscribe from this group, send an email to: m("yahoogroups.com","ts-7000-unsubscribe");" href=""> <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |