[ts-7000] Re: execute an embedded program at startup (newbie)

[Mike Dodd <>]

Kristeen Palmer wrote:
> 
> 
> hi russel,
> thanks for responding.  the answer is that i do not need to be attached 
> to the  console.  i wish linux to boot, then run my application which 
> serves as an ascii string command slave on com2. (my console defaults to 
> com1)

Did you read my reply (msg # 21467) to your initial question? And also 
my reply (#21473) to your second question?

If you try what I suggested, I think you'll find that your program does 
exactly what you want.

-- 
Mike

Mike Dodd
Louisa County, VA USA

http://mdodd.com


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/